Precision Norton Type Lathe Machines

This is a high precision Grade I accuracy lathe featuring Flame hardened Bedways with over 300 BHN hardness, Hardened and ground Headstock Gears, Hardened and ground alloy steel Spindle running in anti-friction taper roller bearings.

The machine is supplied complete with suitable HP 440 volt 3 phase AC electric motor, R/F switch, V belts, 2 MT centres with centre bush, inch & mm gears, oil can, spanner & set of allen keys and instruction manual. The machine is supplied fitted with totally enclosed dial type oil bath Norton type gear box.

It is available in four models with bed length of 1370mm with 177mm centre height to bed length of 2440mm with centre height of 215mm. 

Many extra optional accessories is offered including motorized coolant pump with tank and fittings, starting third shaft with INSTANT foot brake and control panel, rear splash guard and taper turning attachment and 4 jaw dog chuck, 3 jaw true chuck, etc. 

Technical Specifications:

BED WIDTH

325 MM

HEIGHT OF CENTER OVER FLAT BED WAYS

254 MM

MAXIMUM SWING OVER BED

490 MM

MAXIMUM SWING OVER CROSS SLIDE

290 MM

MAXIMUM SWING IN GAP

800 MM

SPINDLE NOSE

6 TPI

NUMBER OF SPINDLE SPEED NO 8 RANGE

30 TO 500 R.P.M

DIAMETER OF HOLE THROUGH SPINDLE

2 TO 60 TPI

METRIC RANGE THREADS

0.5 TO 15 MM

LEED SCREW DIA & PITCH

38 MM 4 TPI

FEED SAFT DIA

22.22 MM

TAIL STOKE SPINDLE DIA

50.8 MM

TAIL STOKE SPINDLE TAPER BORE

MT4

TAIL STOKE SPINDLE TRAVEL

160 MM

POWER REQUIRED

2.2 KW/3HP

Pathak Machines Industries © 2015 All rights reserved | Privacy Policy