All Geared Head Lathe Machine

BED

2V & 2 flat types made of close grained cast iron. Robust and heavily ribbed walls with wide openings to facilitate easy flow of chips. Guide ways are hardened and precision ground stopping.

HEAD STOCK

All geared type. Gears are made from alloy steel & are hardened & precision ground.

FEED BOX

Universal feed box to cut metric Module inch & D.P. Threads

TAILSTOCK

Moves on 'V' & flat guide of the bed. Cross movement is incorporated for turning of slight tapers.

SADDLE

Provided with full length cross slide & taper wedge to adjust sliding clearance.

SAFETY DEVICES

Emergency switch for instantaneous thermal overload relay for electrical system. Mechanical over load tripping for feeds. Shear key for end gears & shear pin for lead interlock for simultaneous start of feeds & thread cutting wipers for guide ways.

MAIN SPINDLE

Made from alloy steel hardened & ground. Supported by precision taper roller bearings.

STANDARD EQUIPMENT

Ø  Electric Motor with Control Panel

Ø  Headstock's and Tailstock's Dead Centre

Ø  Thread Dial Indicator

Ø  Quick Change Gear Box

Ø  Square Tool Post

Ø  Driving Plate

Ø  Set of Spanners & Keys

Ø  Instruction Manual

 

EXTRA ACCESSORIES

Ø  4 Jaw Independent Dog-Chuck with Back Plate

Ø  3 Jaw Self Centering Chuck with Back Plate

Ø  Quick Change Tool Post

Ø  Telescopic Taper Turning Attachment

Ø  Electric Magnetic Brake

Ø  Splash Guard

Ø  Rear Tool Post

Ø  Rapid Traverse of Slide

Ø  Machine Lamp

Ø  Steady Rest

Ø  Follow Rest

Ø  Face Plate

Ø  Tool Post Grinder

Ø  Revolving Centre

 TECHNICAL  SPECIFICATIONS (IN MM)

MODEL

PLG 200

PLG 300

PLG 400

CAPACITY

Height of centre

200

300

400

Swing over bed

400

600

800

Swing over cross slide

260

325

530

Swing in gap

600

865

1200

Bed width

300

375

460

Distance between centres

750mm, 1000mm, 1500mm

1000mm, 1500mm, 2000mm,2500mm,3000mm

1500mm, 2000mm, 2500mm,3000mm,3500mm

HEAD STOCK

Main spindle speeds no.

8 Nos.

8 Nos.

9 Nos.

Optional

16

16

18

Range of Spindle

45-1000 RPM

30-720 RPM

30-720 RPM

Speeds (RPM)

52mm

62mm

90mm

Spindle Bore

3mt

4mt

5mt

THREADS & FEEDS

Metric Threads

0.5-6mm

1-14mm

1-14mm

Withworth Threads TPI

4-60 TPI

2-30 TPI

2-30 TPI

Thread of Lead Screw

4 TPI

2 TPI

2 TPI

No. of Feeds

30

30

30

TAIL STOCK

Tailstock Sleeve Taper

3mt

4mt

5mt

Spindle Diameter

50mm

62mm

75mm

Electricals

2 HP 1440 RPM 3 Phase

3 HP 1440 RPM 3 Phase

5 HP 1440 RPM 3 Phase


NOTE :  We reserve the right to modify the design & specifications without prior notice.

 

Pathak Machines Industries © 2015 All rights reserved | Privacy Policy